Hoppy Easter Card!

Hey Everyone! : ) I'm back! I'm really sorry for the absence! I've been really busy and I have had no time for card making.. But now I am! I will be starting a new segment called Scraping on Sunday. Where I will post a main card on Sunday along with a tutorial. So be aware! : ) But now.. here's the card!

Here's the card for today! It's so cute! : )

Here is the supply basket for today! : )

Cricut Machine

Create a Critter Cricut Cartridge

Stampin' Up! Word Window Punch

Stampin' Up! Modern Label Punch

Stampin' Up! Wild Wasabi Ink Pad

Stampin' Up! Wild Wasabi Cardstock

Light Yellow Card Stock

White Cardstock

Polka Dot Patern Paper

Recollections Pattern Paper Pad

Versa Mark Ink Pad

Versa Mark Ink Pen

Teeny Tiny Wishes Stamp Set

Stamp n Bond Powder

Martha Stewart Green Glitter

Thick Yellow Organza Ribbon

Martha Stewart Scoring Bored

Martha Stewart Heat Gun

You Really don't need all of these.. but I added lots of steps in it today's card!!

So this is what I was originally gonna do with the card.. but I decided not to use the green and yellow patterned paper and not to use the white card stock in the layering. But I used the light yellow cardstock and trimmed it to the standard card size of 4-1/4x5-1/2 inches. Then I trimmed the polka dot green patterned paper to 4x5-1/4.

Here is the layout on my Cricut for you to see how I set up the Bunny and the carrot! The size of the bunny is 3.75 inches. And the carrot is 2.75 inches along with its attachment.

Here's how I laid out the paper! I just followed the lines on the cricut mat. Ignore the smudge on the mat.. Long story! : (

This is what you get at the end of cutting out from the Cricut. Next Layer the layers : ) on top of eachother like so..

I added all of the bunny layers and look how cute he is! : D Also on the carrot I put Green Martha Stewart Glitter on the leaf. Check out the video tutorial page for how to apply loose glitter effectively. Then I adhered the layer on the carrot and added Versa Mark Ink pen with little lines on the carrot! : )

Here I tied the yellow organza ribbon around the green patterned paper and tied it into a little knot. : ) then I adhered it to the Card base. Then with my modern label punch I punched out the white cardstock and then stamped the Happy Easter Sentiment in Wild Wasabi on light yellow cardstock. Then I punched it out from the word window punch.

Here's the finished product! : ) I added the bunny and carrot together and the sentiment up top! Enjoy! Thanks again everyone for being loyal!



30 Day Challenge Card # 8 - Everyday Card

Hello everyone! Here's today's card! I wanted to show you a fun shadowing technique that you can use with punched items and die cuts! Have fun reading on!

This is the supplie I used for today! I was testing out my lighting and it was kinda off so sorry for that!!

Stampin' Up! Heart Punch

Stampin' Up! Corner Rounder

EK Succes Heart border punch

Pink Cardstock

Dear Lizzy Paper Pad- Neopolitan

White Gel Pen

Dimensionals

Here I cut the Floral paper 1-1/8 x 5-6/8 and then I trimmed some polka dot paper 1-7/8 x 5-6/8. Then I trimmed the pink cardstock anny x 5-6/8.



Next I punched out 6 hearts. 3 in the floral pattern and 3 in the pink cardstock. I added small dimensionals on the front of the 3 floral hearts.

Now I added the pink hearts on top of the floral hearts.



 

Here I trimmed the pink cardstock with my heart border punch and adhered it to the back of the floral paper. Then I adhered the polka dot paper on the back of the floral and rounded the corners.

 

 

This is what the finished card should look like! Just adhere the 3 hearts virtically and adhere the design you just made to the card! You could add some white stiching if you'd like I wanted to bring the white out a little more in the card! Thanks for tuning in!

 

 

 

 

 

 

30 Day Card Challenege Card # 7- Thank you

Here's the card today! A friend of mine made me some Cherry Chesecake and I wanted to make her a thank you card for her!

Here I used

My Mind's Eye Stamp Set

My Mind's Eye Dolled Up Paper Pad

Cosmo Cricut Paper pad

Stampin' Up! Wild Wasabi Ink Pad

Kraft Cardstock

Stampin' Up! 5 Petal Punch

Here I used the standard 4-1/4x5-1/2 and turned it hot dog style. Now I cut some patterned paper from My Mind's Eye paper pad the polka dot which is trimmed to fit the card. Then the yellow patterned paper is trimmed a couple sizes smaller I eyeballed it ; ). Then I cut some green plaid paper and trimmed Kraft cardstock.



Here you can put it all together place it closer to the top and leave some space at the bottom : ).

I added some white stiching around the kraft cardstock. And I used some Thank You stamp sentiment I had lying around. I stamped it in Wild Wasabi.

I punched out these flowers and adhered it onto the card. The smaller polka dot is on the back of the larger polka dot! I hope you enjoyed this tutorial! See you tomorrow!

30 Day Challenge Card #6 - Floral Friend

As you know I don't do cards on the weekend! But due to the Sun Flares recently my internet and computer along with all my electronics have been acting wacky so I'm sorry for no card yesterday I couldn't get in to post it! Dang electronics! Any way! Here's yesterdays card!

Here's what I used!!

Kraft Cardstock

White Gel Pen

Stampin' Up! 3 Hearts Punch

Corner Rounder

Cosmo Cricut Floral Paper Pad

Let's get started!!

Here I used the standard 4-1/4x5-1/2 and then I cut a piece of floral pattern paper from the Cosmo Cricut pad if you eyeball it the paper should look something like above. Then I rounded the corners of the inside pattern paper and the card itself. But I only did the top left and bottom right corners.

 Basically I did eyeball this again, but I trimmed the kraft cardstock 1-1/2x 3-5/8. I then added some dimensional adhesive to the back of it.

Here I used my heart punch and punched out four hearts out of two different pieces of patterned paper from the Cosmo Cricut paper pad again. I then adhered them vertically down the center of the Kraft square. Also place the kraft square higher on the card and leave a little space for a sentiment.

I added some stitching down the middle of the hearts, and then around the entire card. Next I used the My Minds Eye Clear Stamp Set and used some black ink. And that's it! Simple and easy!! Thanks for tuning in!

 

30 Day Card Challenge Card # 5 - LOVE Pattern

Ok so this was today's card plan! I decided to make something a little easier! It's so easy you'll be like 'Shut the Front Door!' easy. So let's get started!!

Here are the supplies used.. but ignore the pink ribbon again! I used red organza ribbon instead!

Stampin' Up! Heart Punch

Red Gems

Red Organza Ribbon

Love Me Paper Pad

Red Cardstock

Keep reading for the tutorial! : )

Ok so the LOVE is from the LOVE ME paper pad and I just cut it out. The paper pad is 6x6 so I made my base cardstock 3x6 or I cut it out at 6x6 and scored at 3". So I just trimmed the LOVE and adhered it to the card.

Here I used patterned paper from the same paper pad that matched the hearts under the LOVE. I cut it 1-1/8x6 and adhered it above the LOVE.

I cut the red organza ribbon at 7-1/2 and wrapped it around the card just above the line of paper.

Here I punched out with my Heart Punch the above pattern and added a dimensional to the back. The I put the smaller red gem on the heart and addhered it to the blank space of the card.

Thanks for tuning in! Ill see you tomorrow!! : )

30 Day Challenge Card # 4- Hello Baby

Hey everyone! I'm back! My mouth is still sore from the surgery.. but I'm so happy to show you two cards today! Their so simple and fun at the same time! I hope you enjoy them!

Here are the supplies I used minus the string.. I decided not to use it when I took this picture.. : )

Stampin' Up 5 Petal Punch

Stampin' Up! Word Window Punch

Stampin' Up! Modern Label Punch

Ek Succes 2" Scallop Circle

Stampin' Up! Teeny Tiny Wishes Stamp Set

White Gel Pen

Dark Pink Cardstock

Light Pink Cardstock

Baby Pattern Paper

Cuttlebug

Cuttlebug Swiss Dot Embossing Folder

Dimensionals

Now Let's Get Started!!

Here I cut a base creme cardstock 4x8 and I cut some baby pattern paper 4x4. Dark pink cardstock 3-5/8 and light pink cardstock        3-1/8.

Here I punched out the flower in dark pink cardstock and cut it at the two petals and 3 petals. This will be the sheeps head/ears and legs.

Out of the creme cardstock I punched a scallop circle and ran it through my swiss dot Cuttlebug embossing folder. The I took the legs of the sheep or the two petals and adhered it to the back of the scalloped circle.



Now take the face and add some dimmensionals to the back and using the white gel pen put two dots for the eyes : ) and place it in the middle of the body.

Here's the end product! I added some white stiching around the dark pink cardstock. I added the sheep to the middle, isn't he cute!? I then Stamped in black ink the sentiment 'hello baby' and punched it out in light pink cardstock on the word window punch. And then I punched out with modern label punch in dark pink cardstock.

Thanks for tuning in!

30 Day Challenge Day Card # 3 - Friend Medallion

Hey everyone, I decided to stick with the medallion theme today : ). I wanted to make this card a little more masculineish haha minus the hearts.. But I love the punch! hahaha! But any way enjoy the tutorial!

Ok here is the supplies! I forgot to add the heart punch in this oopsies! But it wasn't hard to make!

Little Black Dress 6x6 paper pad

Stampin' Up! Teeny Tiny Stamp Set

White Gel Pen

Stampin' Up! Corner Rounder

Stampin' Up! 3/4 Circle Punch

Stampin' Up! 3 Hearts Punch

Scallop Edge Scissors

Kraft Cardstock

Black Ink

Martha Stewart Circle Cutter

There you go! Oh! and a little disclaimer.. The Marth Stewart Circle punch I use takes some practice to get used to.. I'd suggest putting it on a cuttlebug B Mat where it's raised up. But also the cutter blade is super super sharp so just be Careful! : )

I cut a piece of Kraft Cardstock 1-1/8 x 5 inches. Then I used some of the assorted patterned paper from the paper pad I cut them into various strip sizes. I then added adhesive to the cardstock and layerd the strips of paper diagonally.

The result should look something like this! Finish all the way to the other end layering different patterns next to each other. Once that was finished I turned it around and cut the excess off.

I adhered the patterned design we just made on to the standard        4-1/2 x 5 Kraft cardstock. Then I eyeballed the size of the width of the black cardstock but the length of it is 5 inches long. I then used the scallop scissors and trimmed the edge. I layered it over the strips of paper and adhered it down.

With the Martha Stewart Circle Cutter I cut out the creme patterned paper from the paper pad. The size of the circle is 2-7/16 And then with my circle punch I punched out a bunch of circles. I added adhesive to the edge of the circle and added then all around the edge on the back.

This is what the finished medallion should look like : )

Now add the medallion to the card and trim the edge of the piece hanging off the card.

I stamped in black ink this sentiment.

Finally I punched out hearts and adhered it to the middle of the medallion. I rounded the top orners of the card. Lastly I added some white stitching to the card. I hope you enjoy this card as much as I did! Thanks for tuning in! : )

Stay tuned in for 26 more days of cards!